LEDlux Buller 250mm 25W 1600 lumen white flush mount in cool white
The LEDlux Buller flush mount is a quality LED with a matte opal glass shade and has a 3-step dimmable function which is controlled by an ON/OFF switch (not included). Turn the power ON/OFF to the fitting 4 times within 2 seconds, the fitting will light up in the following order: Stage 1. Toggle the switch ON, the fitting will light up at 100% brightness. Stage 2. Toggle the switch OFF and then ON, the fitting will light up at 38% brightness. Stage 3. Toggle the switch OFF and then ON, the fitting will light up at 15% brightness. Stage 4. Toggle the switch OFF and then ON, the fitting will be at 100% brightness as in Stage 1. To switch back to 100% brightness at any stage, turn OFF the fitting, and then after 4 seconds turn ON the switch. The fitting will be reset to 100% brightness. NOTE: This fitting is not suitable for use with solid-state or phase type dimmers. Warranty will be void if the fitting is used on the same circuit which has solid-state or phase type dimmers. This light comes with 2 screw colours that you can choose to go on this light being black or chrome. Click Here for Installation Instructions.